Single Phase 1.0 Amp Bridge Rectifier DB101-DB107 Voltage Range 50-1000V
FEATURES
* Ideal for printed circuit board
* Reliable low cost construction utilizing molded
plastic technique
* High surge current capability
* Polarity: marked on body
* Mounting position: Any
* Weight: 1.0 gram
Maximum Ratings & Thermal Characteristics
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
| Parameter | Symbol | DB101S | DB102S | DB103S | DB104S | DB105S | DB106S | DB107S | UNITS |
| Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | V |
| Maximum RMS bridge input Voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | V |
| Maximum DC Blocking Voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | V |
| Maximum instantaneous forward voltage drop per leg at 1.0A | VF | 1.1 | V |
| Maximum DC reverse current at rated TA =25 C DC blocking voltage per element TA =125 C | IR | 10 500 | μA |
| Maximum average forward rectified output current at TA=40 C | IF(AV) | 1.0 | A |
| Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) | IFSM | 50 | A |
| Rating for fusing ( t<8.3ms) | I 2 t | 10 | A2sec |
| Typical thermal resistance per element (1) | ReJA | 110 | ℃/W |
| Typical junction capacitance per element (2) | Cj | 25 | pF |
| Operating junction and storage temperature range | TJ, TSTG | -55--150 | ℃ |
Notes: (1)Thermal resistance from Junction to Ambemt on P.C.board mounting.
(2)Measured at 2.0MHz and applied reverse voltage of 4.0 volts.
Size:
Why choose us?
1. ISO9001:2008 certified factory
2. 20 years rich experience in the diode production
3. Strict quality control, achieve customer's maximum satisfaction
4. The Annual production capacity is over 2 billion
Product Tags:
|
|
1A 50-1000V 1 Phase Bridge Rectifier Surface Mounting DB101S-DB107S Images
|
